External Flash | Sony | HD-2 Max

The Jinbei HD-2 Max Attach Flash is the official successor to our successful HD-2 Pro external flash. Equipped with a Lithium Polymer Battery with a capacity of 1,600 mAh, a Lightningperformance from 80 Ws and one Guide number of 60, which can be adjusted in 9 aperture stops, offers flexibility and performance in the portable format.

With a single battery charge, you can reach over 450 releases, so you have enough power on the go to capture your subjects exactly as desired. The flash is compatible with Sony Cameras.

Through the fast Recycling Time of only 1.5 seconds fast sequential recordings are no problem. The HD-2 Max also impresses in terms of Burning time – this impresses with up to 1/10,000 s in normal mode and 1/50,000 s in freeze mode in an effective Flash duration of t = 0.5.

The HD-2 Max offers me with the Speedlite mode, the Master Mode and the Slave mode three different modes of application. In Speedlite mode the flash is triggered exclusively via the hot shoe of the connected camera. In Master Mode the attachable flash functions as a wireless remote trigger for compatible flashes. The integrated flash of the flash head can be activated or deactivated. In the Slave mode can the flash be triggered by other wireless triggers, such as the Profi Wireless Trigger Mark II.

The external flash offers users the flash modes TTL and Manual. With TTL enjoy the benefits of comfortable automatic functions that adapt to changing lighting conditions during Outdoor Shootings will prove to be very advantageous, as they save you the constant manual adjustment of the flash power on the device. In Manual-Mode (M) you can conveniently adjust the desired flash power as well as all other settings manually via the 2.8" large touchscreen set.

The flash has the following features in Speedlite, Slave, and Master mode Synchronization Modes:

1. The Short-term synchronization HSS allows for shorter shutter speeds than the usual flash sync times. Depending on the camera model, this can go up to 1/10,000 second.
   
   
2. The Freeze Synchronization offers, depending on the camera model, even higher shutter speeds of up to 1/50,000 s (t = 0.5). With even shorter exposure times, you can freeze fast movements, flash against the sun, and use wider apertures at Portrait shots outdoors.
   
   
3. At the Synchronization on the first shutter the flash is triggered at the beginning with a short sync time, and then the ambient light is used to depict the movement.
   
   
4. At the Synchronization on the second shutter will the lightning at the end of the
   Shutter speed triggered with a short burn time after the movement was captured by the ambient light.

To avoid interference when working with multiple devices, you can switch to 31 channels and 6 groups distributes work. Additional flexibility for creative settings and operation via remote control is provided by the integrated ¼" thread connection on the outside of the HD-2 Max, as well as the included Cold shoe standAdditionally, the delivery includes a practical transport bag that protects your HD-2 Max from dirt and dust, as well as a bounce card, a charger with charging cable, a USB-C cable for firmware updates, and a replaceable lithium-polymer battery.

Despite all these functions, it is still compact and weighs only without the battery 460 grams. This way, you can easily take it with you anywhere without having to carry heavy luggage.

Power:80 W/80 Ws Guide number:60 (zoom level 5 corresponds to 105mm focal length | 28mm to 105mm detection range) Flash modes:TTL/manual Sync modes:Normal/Freeze/HSS Power control:9 levels (0.1-/1.0- steps) Burn time (t=0.5 s):Normal:1/800 – 1/10,000 s Freeze:1/2,000 – 1/50,000 s Recycling time:1.5 sec (at full power) Burst mode:frames per second:Up to 20 fps Channels | Groups:31 | 16 color temperature:5,500 K +/- 150 K modeling light | Regulation:3 W | 3 levels Radio receiver:Integrated Frequency band (GHz):2.402 - 2.480 GHz Maximum radiated transmission power (dBm):6 dBm Power supply | Battery operation:mains adapter input:AC 100-240V, 50/60 Hz, 0.5 A Max | Output:5.0V ⎓ 3.0A, 9.0 ⎓V 2.0A, 12.0V ⎓ 1.5A Battery Charger Input:5.0V ⎓ 3.0A | Output:12.6VDC, 1.0A, 12.6W | Replaceable and rechargeable lithium polymer battery (input:12.6 V DC, 1.0 A, 12.6 W | capacity 11.1 V/1,600 mAh/17.76 Wh) Triggering in battery mode:> 450 (with full performance) Cooling:Yes, passive Additional equipment:Zoom function, multi-compatible hot-shoe connection, Canon RT compatibility (99 possible IDs), USB-C connection for firmware update, automatic switch-off, ¼"-Thread connection, remote trigger function Compatible camera brands:Sony cameras Compatible wireless triggers:TR-V6, TR-Q6, TR-Q7, TR-Q7 II, TRS-V Dimensions (L x W x H) | Weight 21.5 x 7.9 x 7.9 cm | 460g

Included:

1x HD-2 Max clip-on flash for Sony 1x Lithium polymer battery 1x Battery charger 1x USB-C cable 1x AC adapter 1x Carrying case 1x Bounce card 1x Cold shoe stand 1x Quick start guide

All downloads can be found in our download center:https://downloads.jinbei-deutschland.de/download/hd-2-max-aufsteckblitz-fuer-sony/

Sony Cameras:A1 A7 A7 III A7 IV A7r A7r III A7r IV A7s III A9 A99 II A6000 A6300 A6500