HD-2 Max clip-on flash

The HD-2 Max clip-on flash from Jinbei was awarded in the photo hits issue 02/2023.

The Jinbei HD-2 Max clip-on flash is the official successor to our successful HD-2 Pro clip-on flash. Equipped with a Lithium polymer battery with a capacity of 1,600 mAh, one lightningperfomance from 80 ws and one Guide number of 60, which is adjustable in 9 f-stops, it offers flexibility and performance in the transportable format.

With a single battery charge you can reach over 450 trips, so you have enough power on the go to capture your subjects exactly as you want them. The flash is compatible with Canon, Sony*, Nikon, Fuji, Panasonic, Olympus cameras as well as with the radio transmitters TR-Q6, , „TR-V6“, TR-Q7 and d „TR-Q7 II“.
* Sonyadapter available seperately.

*Sony adapter sold separately
*Sony adapters sold separately

Through the fast recycling time of merely 1.5 seconds recordings in rapid succession are no problem. The HD-2 Max is also convincing when it comes to things burn time – this impresses with up to 1/10,000s in normal mode and 1/50,000s in freeze mode at an effective Flash duration of t = 0.5.

The HD-2 Max offers with the Speedlite mode, to the master mode and the slave mode three different modes to use. In the Speedlite mode the flash is only triggered via the hot shoe of the connected camera. In the master mode the clip-on flash acts as a wireless remote trigger for compatible flashes. The integrated flash of the flash head can be activated or deactivated. In the slave mode the flash can be triggered via other radio triggers, such as the professional radio trigger Mark II.

The clip-on flash offers users the flash modes TTL and Manually. With TTL Enjoy convenient automatic functions that work with changing light conditions during outdoor shoots prove very advantageous as they save you from having to constantly correct the flash output manually on the device. In the Manually-mode (M) you can easily set the desired flash output and all other settings manually via the 2.8 large touch screenn set.

The flash has the following in Speedlite, Slave and Master modes synchronization modes:

1. The High speed sync HSS enables faster shutter speeds than the usual flash sync speeds. Depending on the camera model, this is enough 1/10,000 second.
   
   
2. The Freeze sync offers, depending on the camera model, even higher shutter speeds of up to 1/50,000 s (t = 0.5). With even shorter exposure times, you can freeze fast movements, flash against the sun and use wider apertures Portrait shots outdoors.
   
   
3. In the Sync on first shutter the flash is triggered with a short sync time at the beginning and then the ambient light is used to display the movement.
   
   
4. In the Sync on the second shutter will the flash at the end of the
   Shutter speed triggered with a short burn time after capturing motion over ambient light.

To avoid interference when working with multiple devices, you can click 31 channels and 6 groups work distributed. The integrated . offers additional flexibility for creative settings and operation via remote release ¼ thread connections on the outside of HD-2 Max, as well as the supplied one Cold shoe stand. In addition, the scope of delivery includes a practical transport bag that protects your HD-2 Max from dirt and dust, as well as a bounce card, a charger with charging cable, a USB-C cable for firmware updates, and a replaceable lithium-polymer Battery pack.

With all these functions, he is still compact and only weighs without the battery 460 grams. So you can easily take it with you anywhere without having to carry heavy luggage with you.

Power:80 W/80 Ws Guide number:60 (zoom level 5 corresponds to 105mm focal length | 28mm to 105mm detection range) Flash modes:TTL/manual Sync modes:Normal/Freeze/HSS Power control:9 levels (0.1-/1.0- steps) Burn time (t=0.5 s):Normal:1/800 – 1/10,000 s Freeze:1/2,000 – 1/50,000 s Recycling time:1.5 sec (at full power) Burst mode:frames per second:Up to 20 fps Channels | Groups:31 | 16 color temperature:5,500 K +/- 150 K modeling light | Regulation:3 W | 3 levels Radio receiver:Integrated Frequency band (GHz):2.402 - 2.480 GHz Maximum radiated transmission power (dBm):6 dBm Power supply | Battery operation:mains adapter input:AC 100-240V, 50/60 Hz, 0.5 A Max | Output:5.0V ⎓ 3.0A, 9.0 ⎓V 2.0A, 12.0V ⎓ 1.5A Battery Charger Input:5.0V ⎓ 3.0A | Output:12.6VDC, 1.0A, 12.6W | Replaceable and rechargeable lithium polymer battery (input:12.6 V DC, 1.0 A, 12.6 W | capacity 11.1 V/1,600 mAh/17.76 Wh) Triggering in battery mode:> 450 (with full performance) Cooling:Yes, passive Additional equipment:Zoom function, multi-compatible hot-shoe connection, Canon RT compatibility (99 possible IDs), USB-C connection for firmware update, automatic switch-off, ¼"-Threaded connection, remote trigger function Compatible camera brands:Canon, Nikon, Fuji, Panasonic, Olympus, Sony (Sony cameras via separately available adapter) Compatible wireless triggers:TR-V6, TR-Q6, TR-Q7, TR-Q7 II , TRS-V Dimensions (L x W x H) | Weight 21.5 x 7.9 x 7.9 cm | 460g

Included:

1x HD-2 Max clip-on flash 1x Lithium polymer battery 1x Battery charger 1x USB-C cable 1x AC adapter 1x Carrying case 1x Bounce card 1x Cold shoe stand 1x Quick start guide

All downloads can be found in our download center:https://downloads.jinbei-deutschland.de/download/hd-2-max-aufsteckblitz-80-ws/

Canon:1DX 1DX MARK II 1DS MARKIII 1DX MARK III 1D MARK4 5D MARK4 5D MARK II 5D MARK III 5DS 5DSR 5D 7D MARKII 7D 6D MARKII 6D 90D 80D 70D 60D 600D 100D 550D EOS-R3 EOS-R5/6 EOS-R/RP EOS M50 Nikon:D5 D4S D850 D810 D800 D780 D750 D700 D610 D600 D500 D60 D90 D7500 D7200 D7100 D7000 D3200 Z7II Z7 Z50 ZFC Z6II Z6 Z5 Sony:A-99II A1 A9 A7R4 A7R3 A7SIII A7II A-7 A-7III A7II A7II A-7III 7R A-6500 A-6300 A-6000 Fuji:GFX-50s GFX-50r GFX-100 XT-4 XT-3 XT-2 XT30 XT20 X-PRO3 X-PRO2 X-H1 Panasonic:Lumix DC-GH5 Lumix DC- GH5S Lumix DC-S1R Lumix DC-S1H Lumix DC-S1 Lumix DC-G Olympus:E-M5 MARK II E-M1 MARK II OM-D E-M1X OM-D E-M1 MARK III OM-D E-M10 MARK IV OM-D E-M10 MARK III